Service for Laying 80 mm Thick Concrete Pavers at Quetta Depot

Pakistan State Oil Company Limited (PSO) invites qualified contractors to provide specialized services for laying 80 mm thick precast concrete pavers in front of the Lube Ware House at Quetta Depot. This procurement is specifically for the Quetta location under the Pakistan State Oil Company Limited department. Items being procured: - Services for dismantling, cutting, and removing existing concrete/gravel/stone (370 m2) - Providing and laying 80 mm thick precast concrete pavers of size 200 mm x 100 mm x 80 mm with minimum compressive strength of 7000 psi (370 m2) - Providing and laying lean concrete 1:2:4 mix ratio using S.R. Cement and approved aggregates with 50 to 70 mm thickness (60 m2, approx. 1.5 m3) The technical scope includes preparation of the base and sub-base with river sand or khaka, compaction using a minimum 10-ton roller or plate compactor, spreading of bonding layer materials, precise laying of pavers ensuring tight joints and uniform alignment, and joint filling with fine river sand or khaka to achieve a neat and compact surface. The lean concrete work involves formwork, mixing, placing, compacting, finishing, and curing as per specifications. Eligibility criteria require contractors to provide all labor, tools, materials, and transportation. Compliance with PSO's Health, Safety, and Environment (HSE) standards is mandatory. Contractors must supply PSO-approved Personal Protective Equipment (PPE) for their staff, who must use it while working inside the depot. The work completion time is 30 days after issuance of the work order. Penalties apply for late completion at 0.10% of the work order value per day, capped at 10%. The tender was published on **2026-07-27** with a submission deadline of **2026-08-11 23:59:59**. Bidders should prepare their Technical and Financial Bids accordingly and ensure Earnest Money and CDR requirements are met as per instructions. A practical tip for bidders: Carefully verify the site conditions and quantities on location before quoting, as actual quantities may vary and payments will be made on verified quantities only. Ensuring compliance with PSO's HSE and PPE requirements will avoid disqualification or delays during execution.