Supply of Electrical Equipment and Accessories for Faisalabad Electric Supply Company Limited

Faisalabad Electric Supply Company Limited (FESCO) invites E-Bids from WAPDA/PEPCO/DISCO's approved manufacturers and suppliers duly pre-qualified and registered with PEPCO/NTDC/DISCOs/PPRA for the supply of electrical materials as per WAPDA/PEPCO/NTDC specifications (amended to date). Bidders must also be registered with Income Tax and Sales Tax Departments. Items being procured: - 145KV, 40KA, 2000 Amp, 110V DC 3-pole SF-6 Gas Circuit Breaker with Steel Supporting Structure, grouting bolts and terminal connectors (09 Nos.) - 132KV Transformer C.Ts 100:200/5-5-5 Amp with Steel Supporting Structure, Terminal Clamps & grouting bolts (09 Nos.) - 132KV P.T 132000/110 Volt with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (09 Nos.) - 132KV Line C.Ts ratio 1200:600:300/5-5-5 Amp with Steel Supporting Structure, grouting bolts and terminal connector (18 Nos.) - 11 KV Neutral C-T 50/5 Amp (03 Nos.) - 132KV Bus Isolator with Steel Supporting Structure, G-Bolt & T-Connector (14 Nos.) - 132KV Line Isolator with Steel Supporting Structure, G-Bolt & T-Connector (06 Nos.) - 132KV Metal oxide Surge Arrester with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (07 Nos.) - 11KV Metal oxide Surge Arrester (03 Nos.) - 132KV Non-Ceramic Polymer Insulators (Composite) 120-KN Minimum Leakage Distance 5616 mm & Maximum Permissible Section Length 1898 mm (581 Strings) - 11KV Capacitor Cell 200 KVAR (180 Nos.) - 11KV Capacitor Rack with explosion fuse & bus bar and post complete set (11 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPA (19 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPD (07 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPG (12 Nos.) - 132 KV D/C Tower type ZM-1 with allied accessories (01 No.) - Stub and Cleat with nuts and bolts for ZM-1 Type Tower (04 Nos.) - 6-Meter leg Extension for ZM-1along with allied accessories (01 No.) - 132 KV D/C Tower type ZM-30 with allied accessories (03 Nos.) - Stub and Cleat with nuts and bolts for ZM-30 Type Tower (12 Nos.) - 3-Meter leg Extension for ZM-30along with allied accessories (01 No.) - 132 KV D/C Tower type ZM-60 with allied accessories (03 Nos.) - Stub and Cleat with nuts and bolts for ZM-60 Type Tower (12 Nos.) - 3-Meter leg Extension for ZM-60along with allied accessories (01 No.) - 220KV ED type Tower with allied accessories (01 No.) - Stubs and Cleat for 220KV ED type Tower (04 Nos.) - 6 Meter Leg Extension for 220KV ED Toweralong with allied accessories (04 Nos.) - 132 KV Beam (12 Nos.) - 132 KV Column (16 Nos.) - 132 KV Column High Level 13.8 + 3.1-Mtr (03 Nos.) - 132 KV Earthing Mast (03 Nos.) - 11 KV Structure (03 Nos.) - Earthing Platform (24 Nos.) - Single Tension Fitting for Rail Conductor (304 Sets) - Mid span Joint for Rail Conductor (13 Nos.) - Repair Sleeve for Rail Conductor (11 Nos.) - PG Clump for Rail Conductor (96 Nos.) - Single Tension Fitting for Lynx Conductor (78 Sets) - Mid span Joint for Lynx Conductor (12 Nos.) - Repair Sleeve for Lynx Conductor (06 Nos.) - Stock Bridge Damper for Lynx Conductor (72 Nos.) - Spacer SH-400 (12 Nos.) - Aluminum Pipe 4-M long 63mm dia (03 Nos.) - Suspension Fitting for Earth Wire (20 Sets) - Tension Fitting for Earth Wire (63 Sets) - Mid span Joint for Earth Wire (07 Nos.) - Stock Bridge Damper for Earth Wire (96 Nos.) - Earth Riser for 95mm sq (420 Nos.) - Earth Rod 16mm dia 3-M long (140 Nos.) - V-shackle size 5/8" x 9" (66 Nos.) - Stock Bridge Damper for Rail Conductor (504 Nos.) - Single Suspension Fitting for Rail Cond. (120 Nos.) - Double Suspension Fitting for 600mm sq (06 Nos.) - Single Tension Fitting for 600mm sq (06 Sets) - Double Tension Fitting for 600mm sq (18 Sets) - Earth wire Tension Assembly with P.G. Clump (48 Nos.) - PG Clump for Lynx Conductor (144 Nos.) - Outdoor Termination Kits for 1000MCM (S/Core) Power Cable (42 Sets) - Indoor Termination Kits for 1000MCM (S/Core) Power Cable (66 Sets) - Indoor Termination Kits for 4/0 AWG 3/Core cable (06 Sets) - Connector type TMHH (36 Nos.) - Connector type TMLH (06 Nos.) - Connector type 90BH30 (09 Nos.) - Connector type 90B63F (03 Nos.) - Connector type TFMHH 1x600,2x600 (54 Nos.) - Connector type OMHF (06 Nos.) - Cartridge type A (700 Nos.) - Mould for type A (10 Nos.) - Cartridge type B (450 Nos.) - Mould for type B (09 Nos.) - Cartridge type C (140 Nos.) - Mould for type C (04 Nos.) - 11KV, 25KA, 2500Amp Incoming Panel for 31.5/40MVA Power Transformer (02 Nos.) - 11KV, 25KA, 2500Amp Capacitor Control Panel (03 Nos.) - 11KV, 25KA, 630Amp Outgoing Switch Gear Panel (22 Nos.) - Relay Panel RP-3 with software and connecting cables (06 Nos.) - Relay Panel RP-4 with software and connecting cables (04 Nos.) - AC/DC Station Auxiliary Panel (05 Nos.) - 110V 150AH DC Station Battery with steel rack (05 Nos.) - 110V Battery Charger (07 Nos.) The tender will be evaluated on a whole tender basis except for the last lot which is on an item-wise basis. Bidders must be registered with PEC, FBR, and have NTN/STRN. Earnest money and bid security requirements apply as per PPRA rules. The tenders will be received and opened at 11:00 AM and 11:30 AM respectively on the dates specified for each lot, ranging from 22nd September 2026 to 30th September 2026. Interested bidders should carefully prepare their technical and financial bids according to the specifications and submit them before the deadlines. A practical tip for bidders is to ensure all technical documents and certifications are complete and up to date to avoid disqualification during the technical evaluation phase.