Separation of Warehouse Office Room with Glass Partition and Interior Furnishing

Pakistan State Oil Company Limited (PSO) Karachi is procuring services for the separation of a warehouse office room with glass partition, interior furnishing, and ceiling works. The project site is located at PSO House, Khayaban-e-Iqbal, Clifton, Karachi. This tender involves fabrication and installation of a partition room measuring 10 ft. by 20 ft. The partition will include approximately 100 sq. ft. of 12 mm tempered glass with a mirror blur paper wrapping finish. The scope also covers installation of one tempered glass entrance door fitted with a hydraulic motor/floor spring and all necessary hardware accessories. Interior furnishing includes provision and installation of workstations fabricated from high-quality chipboard with PVC lamination finish, each approximately 25 sq. ft. in area and 18 inches in width. Additionally, the tender requires supply and installation of two chipboard file cabinets measuring 6 ft. in height and 18 inches in depth, along with five mobile drawer boxes. The ceiling work covers fabrication and installation of a new ceiling for the entire room area, including framework, finishing, fittings, and accessories to ensure complete and satisfactory execution. All materials must be brand new, approved, and of specified quality. The contractor must comply with PSO HSE policies, ensure use of Personal Protective Equipment (PPE) by workers, and maintain site cleanliness throughout the project. Timely completion is critical, with penalties for unjustified delays. Interested bidders should be registered with FBR and ATL, possess relevant PEC categories for interior furnishing and civil works, and demonstrate experience in similar projects. The tender was published on 1st June 2026, with submission deadline on 16th June 2026. Bidders must submit their Technical and Financial Bids by the closing date at PSO House Karachi. Earnest Money and CDR requirements apply as per tender documents. A practical tip for bidders is to ensure all technical specifications and quality standards are strictly met in the bid documents and site execution plan. This will avoid disqualification during technical evaluation and ensure smooth project delivery within the stipulated timeframe.