Supply of Electrical Materials for Faisalabad Electric Supply Company Limited

Faisalabad Electric Supply Company Limited (FESCO) invites E-Bids from WAPDA/PEPCO/DISCO's approved manufacturers and suppliers who are duly pre-qualified and registered with PEPCO/NTDC/DISCOs/PPRA in the required categories. The procurement follows the Single Stage One Envelope Method for the supply of materials according to WAPDA/PEPCO/NTDC specifications (amended to date). Bidders must also be registered with Income Tax and Sales Tax Departments. Items being procured: - 145KV, 40KA, 2000 Amp, 110V DC 3-pole SF-6 Gas Circuit Breaker (extended creepage) with Steel Supporting Structure, grouting bolts and terminal connectors (Qty: 09 Nos.) - 132KV Transformer C.Ts 100:200/5-5-5 Amp with Steel Supporting Structure, Terminal Clamps & grouting bolts (Qty: 09 Nos.) - 132KV P.T 132000/110 Volt with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (Qty: 09 Nos.) - 132KV Line C.Ts ratio 1200:600:300/5-5-5 Amp with Steel Supporting Structure, grouting bolts and terminal connector (Qty: 18 Nos.) - 11 KV Neutral C-T 50/5 Amp (Qty: 03 Nos.) - 132KV Bus Isolator with Steel Supporting Structure, G-Bolt & T-Connector (Qty: 14 Nos.) - 132KV Line Isolator with Steel Supporting Structure, G-Bolt & T-Connector (Qty: 06 Nos.) - 132KV Metal oxide Surge Arrester with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (Qty: 07 Nos.) - 11KV Metal oxide Surge Arrester (Qty: 03 Nos.) - 132KV Non-Ceramic Polymer Insulators (Composite) 120-KN Minimum Leakage Distance 5616 mm & Maximum Permissible Section Length 1898 mm (Qty: 581 Strings Nos.) - 11KV Capacitor Cell 200 KVAR (Qty: 180 Nos.) - 11KV Capacitor Rack with explosion fuse & bus bar and post complete set (Qty: 11 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPA (Qty: 19 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPD (Qty: 07 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPG (Qty: 12 Nos.) - 132 KV D/C Tower type ZM-1 with allied accessories (Qty: 01 No.) - Stub and Cleat with nuts and bolts for ZM-1 Type Tower (Qty: 04 Nos.) - 6-Meter leg Extension for ZM-1along with allied accessories (Qty: 01 No.) - 132 KV D/C Tower type ZM-30 with allied accessories (Qty: 03 Nos.) - Stub and Cleat with nuts and bolts for ZM-30 Type Tower (Qty: 12 Nos.) - 3-Meter leg Extension for ZM-30along with allied accessories (Qty: 01 No.) - 132 KV D/C Tower type ZM-60 with allied accessories (Qty: 03 Nos.) - Stub and Cleat with nuts and bolts for ZM-60 Type Tower (Qty: 12 Nos.) - 3-Meter leg Extension for ZM-60along with allied accessories (Qty: 01 No.) - 132 KV Beam (Qty: 12 Nos.) - 132 KV Column (Qty: 16 Nos.) - 132 KV Column High Level 13.8 + 3.1-Mtr (Qty: 03 Nos.) - 132 KV Earthing Mast (Qty: 03 Nos.) - 11 KV Structure (Qty: 03 Nos.) - Earthing Platform (Qty: 24 Nos.) - Suspension Fitting for Earth Wire (Qty: 20 Sets) - Tension Fitting for Earth Wire (Qty: 63 Sets) - Mid span Joint for Earth Wire (Qty: 07 Nos.) - Stock Bridge Damper for Earth Wire (Qty: 96 Nos.) - Earth Riser for 95mm sq (Qty: 420 Nos.) - Earth Rod 16mm dia 3-M long (Qty: 140 Nos.) - V-shackle size 5/8" x 9" (Qty: 66 Nos.) - Stock Bridge Damper for Rail Conductor (Qty: 504 Nos.) - Single Suspension Fitting for Rail Conductor (Qty: 120 Sets) - Double Suspension Fitting for 600mm sq (Qty: 06 Nos.) - Single Tension Fitting for 600mm sq (Qty: 06 Sets) - Double Tension Fitting for 600mm sq (Qty: 18 Sets) - Earth wire Tension Assembly with P.G. Clump (Qty: 48 Nos.) - P.G Clump for Lynx Conductor (Qty: 144 Nos.) - Outdoor Termination Kits for 1000MCM (S/Core) Power Cable (Qty: 42 Sets) - Indoor Termination Kits for 1000MCM (S/Core) Power Cable (Qty: 66 Sets) - Indoor Termination Kits for 4/0 AWG 3/Core cable (Qty: 06 Sets) - Connector type TMHH (Qty: 36 Nos.) - Connector type TMLH (Qty: 06 Nos.) - Connector type 90BH30 (Qty: 09 Nos.) - Connector type 90B63F (Qty: 03 Nos.) - Connector type TFMHH 1x600,2x600 (Qty: 54 Nos.) - Connector type OMHF (Qty: 06 Nos.) - Cartridge type A (Qty: 700 Nos.) - Mould for type A (Qty: 10 Nos.) - Cartridge type B (Qty: 450 Nos.) - Mould for type B (Qty: 09 Nos.) - Cartridge type C (Qty: 140 Nos.) - Mould for type C (Qty: 04 Nos.) - 11KV, 25KA, 2500Amp Incoming Panel for 31.5/40MVA Power Transformer (Qty: 02 Nos.) - 11KV, 25KA, 2500Amp Incoming Panel for 20/26MVA Power Transformer (Qty: 01 No.) - Control Panel MCP-30 (Qty: 08 Nos.) - Control Panel MCP-50 (Qty: 04 Nos.) - Relay Panel RP-3 with software and connecting cables (Qty: 06 Nos.) - Relay Panel RP-4 with software and connecting cables (Qty: 04 Nos.) - AC/DC Station Auxiliary Panel (Qty: 05 Nos.) - 110V 150AH DC Station Battery with steel rack (Qty: 05 Nos.) - 110V Battery Charger (Qty: 07 Nos.) The technical scope includes supply as per WAPDA/PEPCO/NTDC specifications amended to date, ensuring quality and compatibility with existing infrastructure. Bidders must be registered with relevant authorities and have experience in supplying electrical materials to WAPDA/PEPCO/NTDC/DISCOs. The tender closing date is **30th September 2026** at 11:00 AM, with opening at 11:30 AM on the same day. Bids should be submitted electronically as per the E-Bid invitation. A practical tip for bidders: Ensure all technical documents and certifications are complete and compliant with WAPDA/PEPCO/NTDC standards to avoid disqualification during technical evaluation. Early submission is advised to handle any portal issues.