Annual Frame Work Contract for Rehabilitation of Sullage Carrier, Drains, Gully Grating, Sewer Line, Brick Work, Brick Wall & Flooring etc under Municipal Committee Burewala

The Municipal Committee Burewala invites bids for an Annual Frame Work Contract for the rehabilitation of various infrastructure components in Burewala city. The contract covers extensive civil and construction works aimed at improving the drainage and sewerage system, brick masonry, flooring, and other related infrastructure under the municipal committee's jurisdiction. Items being procured: - Earth work excavation in open cutting for water supply lines, sewers and manholes (1125 %Cft) - Providing and laying RCC pipe sewers, moulded cement concrete 4000 psi confirming to ASTM Specification (300 p.ft) - Providing and laying RCC pipe sewers, moulded cement concrete 4000 psi confirming to ASTM Specification, including carriage of pipe from factory to site, lowering in trenches, jointing with rubber ring, cutting pipes where necessary (1000 p.ft) - Providing and laying RCC pipe, moulded with cement concrete, spigot socket or collar joint (300 p.ft) - Cement concrete brick or stone ballast 1½" to 2" (40 mm to 50 mm) gauge in foundation and plinth (192 %Cft) - Cement concrete plain including placing, compacting, finishing and curing complete (including screening and washing of stone aggregate) (480 %Cft) - Pacca brick work other than building upto 10 ft (1:4) (3 m) height (250 p.sft) - Lettering and printing of signage/direction boards/road delineators of any colour by machine including cost of digital lettering, lamination & paste etc complete in all respect (250 p.sft) - Pacca brick work in foundation and plinth (450 %Cft) - Small iron work such as guest plates, knees, bends, stirrups, straps, rings etc including cutting, drilling, riveting, handling, assembling and fixing (540 %Kg) - Fabrication of heavy steel work with angle, tees, flat iron round iron and sheet iron for making trusses, girders, tanks etc including cutting, drilling, riveting, handling, assembling and fixing (240.0 %Kg) - Providing and laying damp proof course of cement concrete 1:2:4 using cement, sand and shingle including bitumen coating with one coat bitumen and one coat polythene sheet 500 gauge 2" thick (40 mm) (75 %Sft) - Making and fixing steel grated doors complete with locking arrangement, angle iron frame 2"x2"x3/8" and 4" (20 mm) square bars 4" (100 mm) centre to centre with locking arrangement (96.0 P.Sft) - Painting of old surface including surface and paint of doors and windows any type of edges (400 %Sft) - Painting of old surface including surface and paint of doors and windows any type of edges (450 %Sft) - Cement plaster 1:4 upto 20' (6.00 m) height (2000 %Sft) - Cement pointing struck joints on walls upto 20' (6.00 m) height ratio 1:3 (700 %Sft) - Providing and applying weather shield paint of approved quality on external surface of building including preparation of surface, application of primer complete in all respect (500 %Sft) - Distempering old surface two coats P-70, 2m 24 B (3200 %Sft) - White washing on old surface two coats P-70 (10000 %Sft) - Scraping bricks dismantled from pacca masonry (1000 %No) - Dismantling cement concrete 1:2:4 plain (450 %Sft) - Dismantling brick or flagged flooring without concrete foundation (2000 %Sft) - Removing cement or lime plaster (900.0 %Sft) - Scraping a) White wash or colour wash (5760.0 %Sft) - Dressing and levelling of earthwork to designed section etc (6000 %Sft) - Earthfilling in/soil lead upto 3 miles (750 %Cft) - Providing and fixing precast edge kerb stone 100 mm to 150 mm thick of 3500 PSI compressive strength embedded in PCC 1:2:4 over lean concrete 1:4:8 etc complete in all respect with painting (300 p.ft) - Dry rammed brick or stone ballast 1 1/2" to 2" gauge (3300 %Cft) - Providing and installing PVC blind pipe 8.5.5 in tube well bore hole including sockets and solvents and jointing with strainer (30 6"dia p.rft) - Providing and laying tuft pavers having 7000 PSI crushing strength approved manufacturer over 2" to 3" sand cushion including finishing to require slope complete in all respect (2500 P.Sft) - Providing and laying tuft pavers having 7000 PSI crushing strength approved manufacturer over 2" to 3" sand cushion including finishing to require slope complete in all respect (500 P.Sft) - Laying of tuft paver (1500 P.Sft) - Earth, watering and ramming lead upto one chain (30 m) lift upto 5 ft (1.5 m) by manual in ordinary soil (920 P.Sft) - Providing and laying superb quality ceramic tile floors of master/stile brand or approved equivalent manufacturer of specified size with adhesive bond over 3/4" thick cement sand plaster etc complete (3205 P.Rft) - Painting traffic lane marking of specified width thermoplastic (TP) paint including glass beads complete in all respect (250 %Cft) - Supplying bamboos 16" to 20" (4.9 to 6.10 m) long 22" to 5" (63 to 125 mm) dia sharping (150 p.no) - Providing/fixing reflector/high intensity prismatic (HIP) tape 1/2" printing and lamination approved colour input rate (100 p.sft) The scope includes excavation, laying and jointing of pipes, brick masonry, concrete works, plastering, painting, signage, and other civil works as per specifications. The work requires compliance with ASTM standards and relevant Pakistan standards for materials and workmanship. Eligible bidders should have relevant PEC categories, valid FBR registration, and experience in similar municipal infrastructure projects. Earnest money and bid security requirements will be as per the tender documents. Bids must be submitted by 18th August 2026. The submission address and detailed terms will be available in the tender documents issued by the Municipal Committee Burewala. A practical tip for bidders: Carefully verify the technical specifications for pipe laying and concrete mix designs to ensure compliance and avoid disqualification during technical evaluation. Early site visits to understand ground conditions can also improve bid accuracy and execution planning.