Supply of Electrical Equipment and Components for Faisalabad Electric Supply Company Limited (FESCO)

Faisalabad Electric Supply Company Limited (FESCO) invites E-Bids from WAPDA/PEPCO/DISCO's approved manufacturers and suppliers who are duly pre-qualified and registered with PEPCO/NTDC/DISCOs/PPRA in the required categories. The procurement will follow the Single Stage One Envelope Method for the supply of electrical materials according to WAPDA/PEPCO/NTDC specifications (amended to date) and requires registration with Income Tax and Sales Tax Departments. Items being procured include: - 145KV, 40KA, 2000 Amp, 110V DC 3-pole SF-6 Gas Circuit Breaker (26 Nos.) - 145KV, 40KA, 2000 Amp 110V DC 3-pole SF-6 Gas Capacitor Switching Circuit Breaker (3 Nos.) - 132KV P.T 132000/110 Volt with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (9 Nos.) - 145 KV Current Transformer 800:400/1 Amp with Steel Supporting Structures, Terminal Clamps & Grouting Bolts (3 Nos.) - 132kV, 40kA, Single Phase Metering C.Ts Ratio 1200:600/1 Amp, Accuracy Class 0.2sFS5 (6 Nos.) - 132kV Voltage Transformers (Grid Metering) Accuracy Class 0.2, Ratio 132kV/√3/110/√3 Single Phase Single Core (6 Nos.) - 132KV Line C.Ts ratio 1200:600:300/5-5-5 Amp with Steel Supporting Structure (52 Nos.) - 132KV Bus Isolator with Steel Supporting Structure, G-Bolt & T-Connector (20 Nos.) - 132KV Metal oxide Surge Arrester with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (31 Nos.) - 66KV Metal oxide Surge Arrester with Steel Supporting Structure, Terminal Connectors & Grouting Bolts (10 Nos.) - 132KV Non-Ceramic Polymer Insulators (Composite) 120-KN Minimum Leakage Distance 5616 mm & Max Permissible Section Length 1898 mm (2593 Strings) - 11KV Capacitor Cell 200 KVAR (213 Nos.) - 132KV Capacitor Unit 400 KVAR (180 Nos.) - 132 KV Capacitor Bank (36-MVAR) with Rack, Explosion fuse & Bus Bar and Posts complete set (2 Nos.) - 132KV Transmission Line Steel Tubular Pole type SPG (2 Nos.) - 132 KV D/C Tower type ZM-1 with allied accessories (59 Nos.) - 6-Meter leg Extension for ZM-1 (2 Nos.) - 3-Meter leg Extension for ZM-30 (2 Nos.) - 132KV Beam (7 Nos.) - Earthing Plateform (17 Nos.) - Single Tension Fitting for Lynx Conductor (294 Sets) - Stock Bridge Damper for Lynx Conductor (214 Nos.) - Earth wire Tension Assembly with P.G Clamp (6 Nos.) - Spacer SH-400 (27 Nos.) - Double Groove PG for 95mm Conductor (105 Nos.) - Single Groove PG for 95mm Conductor (603 Nos.) - Various Connectors including TMLH, TMAA, 90BH30, 90BH40, OBH40, OMHS, T-Clamp, PG Connector for Dog Conductor, PG Clump for Lynx Conductor, Single U-Bolt Clamp, T-Clamp for Rail Conductor, Cartridge types A, B, C, Mould for type A, Indoor Termination Kits for 1000MCM Power Cable, and 11KV T/Kits for various MCM sizes - Control Panels MCP-30, MCP-50, MCP-40, MCP-32, MCP-51 for 220 Volt DC Auxiliary supply - 02 Volt Lead Acid Station Spare Cells (Exide make) 150Ah or equivalent (150 Nos.) - Battery Bank 220 volt DC (1 No.) The technical scope covers supply of high voltage electrical equipment and components with steel supporting structures, terminal connectors, grouting bolts, and accessories as per WAPDA/PEPCO/NTDC specifications amended to date. Bidders must be registered with the relevant authorities and comply with all technical and financial requirements including Earnest Money and CDR submission. The tender closing date is **30th September 2026** with bid submission and opening times at 11:00 AM and 11:30 AM respectively on specified dates for each lot. Bids should be submitted electronically as per the E-Bid invitation. A practical tip for bidders: Ensure your registration with PEPCO/NTDC/DISCOs is current and complete, and carefully review the amended WAPDA/PEPCO/NTDC specifications to avoid disqualification on technical grounds. Early submission is advised to avoid last-minute issues with the e-bidding system.